2000 Jeep Grand Cherokee "abs working" Questions

...(4X4 = 4 sensors , 2X4 = 2 front sensors) or damages/dirty , or you ABS pump are not working properly, regarding your reverse light, check the fuse, relay, bulb and even your wiring ...

...the abs system from working while keeping your speedometer is to remove one of the front sensors or otherwise make it inoperable. Good luck. Yes...remove ABS fuse in fuse box located under the

I have a 1998 Jeep Grand Cherokee. Brakes work fine but no abs. This I can live without but as the abs light does not come on dash board, testing station failed it. Tried obvious like bulb and wiring ...

...abs light is on, my brake light is on and my speedometer nor odometer are working? 2004 jeep grand cherokee larado 6 cyl 4.0 liter here is the short version... the vehicle speed sensor is actual an ...

working fine - drive 100 miles/day and jeep has close to 86000 miles on it It is probably a wheel sensor not reading right. In order to read the abs system you have to have the program that reads this

...so anything between will cause a problem.Failing this I'm afraid you will have to take it in and let a mechanic look at it. Good luck.PS if the abs light is on I doubt that your abs system is

...ABS System is not working. A diagnostic scanner computer would be required to pull the trouble code and to diagnose the failed component would need to be repaired or replaced to get the light to go ...

I have a 97 Jeep Grand Cherokee and the ABS light constantly stays on. Had breaks done a year ago. any solutions? Brake work has nothing to do with a check light or ABS light on dash You have an ABS ...

ABS warning light stays on One of your wheel sensors are defective. Have a mechanic troubleshoot it. You can still drive without the ABS. Your regular brakes will still work. nah scan the ABS first! i

abs light on You will need to have the trouble codes read to find out exactly which component of the abs system is bad and causing the light to illuminate and the abs system not to work.