2000 Jeep Cherokee "engine start" Questions

Ad

...start,,engine light does not come on Charged the battery over night, also changed the spark plug and wiring but the battery lies and after jumping it, it does not hold the charge. Is this a battery ...

Ad

engine harder to start, only when engine is hot. engine starts easilly in the morning. towards end of day after several starts engine turns over but takes a long time to start. battery,cables,fuel ...

Ad

...start. Is the check engine light lit up on the dash, when it won't start, as you try starting it? If no check engine light, then the jeep ecu is in need of repair. If the check engine light is on but ...

...engine it won't start again until it gets cold Possible bad coolant temp sensor. no year, car, how sad that, and no country, double sad.....!!! and no engine size stated, strike 3, im out. wont crank ...

...engine. What is the problem. Thanks Cold starts right up. When hot have to crank three times. Its a hot start issue. Can be related to low fuel pressure or problem with crank sensor. Also it can be ...

...start check engine light problem. Check to see if your check engine light comes on, when you turn on the ignition, at the times when the fuel pump is 'delayed'. If no check engine light comes on then ...

...gear to do it.It cost $120.A lot cheaper than an engine pull.(the new engine bolts cost $6.)They main bit was to get a spinning metal die in there to give the drill a good start.Mate.I hope this ...

...town this doesn't happen. I also have the knocking sound at start up briefly and when the engine is warm sitting at stop light sometimes. Could it be the knock sensor? If so where is it

Question about Jeep Cherokee

1 Answer

Engine will not start Starter works, battery voltage is 12.8 volts dc, engine is getting fuel, new coil pack, ignition module test ok, but engine will not start. what year is your cherokee? Have you ...

...pressure so if any one can help please do. Sounds like a faulty fuel pump, engine will run on 40 psi of fuel pressure but requires 60 to 70 psi to start if engine has fuel injection. hope this

Not finding what you are looking for?
2000 Jeep Cherokee Logo

902 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...