1998 Jeep Wrangler "replacing clutch master cylinder" Questions

Ad

Question about Jeep Wrangler

1 Answer

...replacing both the slave cylinder and clutch master cylinder would be the fix especially if they have not been serviced since manufacture take it to an accredited brake /clutch specialist shop for ...

Ad

clutch master cylinder or not. Check to see if it does, it will be next to the brake master cylinder, and look like a single round silver dollar sized vesle. To the left of your brake master cylinder.

Ad

Question about Jeep Wrangler

4 Answers

...replacing it soon after anyway.The thing is, There are rubber cups that wear out or the cylinder bore gets rusty and cause oitting the cups can't seal. They aren't very costlyin relation to having ...

Question about Jeep Wrangler

1 Answer

...master 1st and pray it cures it slave cylinder easiest one to inspect first will be down at gearbox master cylinder will be under hood opposite the clutch pedal check fluid level first and top ...

...sounds like your hyadraulic clutch master have internal leak lose pressure, I suggest you to replace the hydraulic clutch kit to fix it. I think the slave cylinder is inside the bellhousing, big

...the clutch to where it would be un-useable. I re-fill the reservoir, and off we go. I replaced the clutch master slave cylinder less than a year ago. Any ideas? this is a faulty clutch master ...

Question about Jeep Wrangler

4 Answers

...clutch master. If the fluid is full but you aren't getting any pressure to the slave, likely the master is internally bypassing. ]Some systems use a throwout bearing and slave unit that are integral ...

clutch master cylinder in to the inside, or follow plastic line inside the engine compartment, from the clutch master cylinder in to slave Cylinder, one of the two are bad, but when one goes the other

clutch master cylijnder for fluid and leakage, check hydraulic line and slave cylinder for leaks. If fluid low or empty, bleed as you would a brake wheel cylinder. If full,have someone work the clutch

...master cylinder and slave or a problem with the clutch assembly itself? Any help would be appreciated. Hi Bruce I advise you to check the flexible hose first, if its ok, so the problem is the ...

Not finding what you are looking for?
1998 Jeep Wrangler Logo

720 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...