1998 Jeep Wrangler "clutch solenoid" Questions

Clutch Solenoid i need to know the location of the Torque Converter Clutch Solenoid on a 1998 Jeep wrangler, check engine light came on, had it checked and turned off, and the tranny (torque converter

...clutch keeps the engine from turning over .... your car probably has starter a relay/solenoid somewhere close to the battery, from which the intial engine electricity comes, and goes to starter and ...

...clutch solenoid on a 1999 Saturn SL2. Which and where is it located? This won't be a fun job. Notice this guy stated he took him about 5 hours and I think he is pretty knowledgeable. So if you are a ...

...clutch pedle is not depressed , could be the safety switch not working. Otherwise , maybe the starter / solenoid you put in is either not working , or not all wires hooked up. Need 3 wires. 1 big one ...

p0743 you have a failure in the transmission Torque Converter clutch control circuit, (known as the TCC) this can be the control solenoid or the wiring or the actual trans torque converter.

torque converter clutch solenoid located Where is it located In the tranny pan. Attached to valvebody.

...solenoid, keys in pocket. if that test passes the starter is ok, (amazing right?) 1min work. and if passes that means the key line is dead. Key line dead, all steps ok above, so now what, well if M/T ...

...the solenoid with a screwdriver. Find the neutral sefety switch and 99% chance, you have found the problem. generally on stickshift cars, the switch is above the clutch pedal, not on the

jeep will clutch start,wont start with the key,starer,ignition switch are good Sounds like a bad solenoid on the starter.

...clutch is depressed, and it does not click like it does to turn over but instead has monotone raspy metal screatch sound I would suspect your starter solenoid as the culprit, at least thats the first ...