01 Jeep Grand Cherokee limitied. First had code p1762 and replaced the governor pressure sensor and solenoid. Now drives worse shifting in 1st, 2nd, and 3rd mainly shifting from 2nd to 3rd and now has
01 jeep Grand Cherokee transmission problem First had code p1762 and replaced the governor pressure sensor and solenoid. Now drives worse shifting in 1st, 2nd, and 3rd and now has code p1757 saying ...
...01 grand cherokee laurado 4.0 Here is an article I found talking about the Transmission. The second generation Grand Cherokee: 1999-2004 Jeep WJ The first Grand Cherokee was redesigned in 1999, for ...
...Cherokee XJ - won't shift? I have an 01 XJ that worked beautifully until my husband replaced the front bumper. Now, it won't shift gears - at all. Our local Jeep dealer can't figure it out either ...
...01 jeep grand cherokee laredo wont shift out of 1st gear. I have reverse also. worked fine never had any problems then i parked and went into store and came out and car wouldnt shift. I tried low ...
..."cold start injector" sometimes it is the problem Don't know if you have corrected this or not yet but I had a similar problem with an 01 grande cherokee and it was the crank position sensor. Try ...
01 jeep grnd Cherokee trans clunks w/ on hills & check eng light comes on . After code reset( 3-4) out of sink. Taking the O D off this does not happen. Had trans fluid changed prior to this. Any ...
...easily.------- Click the link below:--- No 4x4 light on dash? http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html ----------- 4X4 Truck makes roaring noise in the front end? ...
...Grand Cherokee V8, 4.7L or R am getting a kick sound, same as when I drive and shift from 1 to Gear number 2 am getting the same kick sound, I did a scanning and got, X431 DIAG REPORT SMARTBOX: ...
720 questions posted
Usually answered in minutes!
635 Questions
545 Questions
469 Questions
339 Questions
340 Questions