1994 Jeep Wrangler "replace turn signal" Questions

Ad

...either freezes on, or does not work. The Hazards DO work, and I have replaced all the bulbs, and the fuse is okay too. Any suggestions? The turn signal flasher is sticky and will have to be

Ad

...turn signal and brake light dont work The left rear turn signal and brake light on my 1997 Jeep Wrangler don't work. I have replaced the bulb, flasher, and signal switch. The bulb lights up when the ...

Ad

...turn signal/multifunction switch to do this. They have little plastis tabs that are hit when the steering is turned to cancel the signal. If those tabs have worn down or broken, the switch continues ...

Question about Jeep Wrangler

1 Answer

...I used for switch replacement instructions. http://www.jeepforum.com/forum/f11/write-up-replace-turn-signal-switch-97-xj-620147/ If it isn't a fuse or wiring issue I would look into the

Question about Jeep Wrangler

2 Answers

...TURN SIGNAL IS GOING LIKE CRAZY WHEN IT IS TURNED ON REPLACED THE BULB BUT THAT DIDNT HELP WONDERING IF IT IS A FUSE THANKS ANDREW replace all bulbs on that side,or check for broken ground wires. I ...

...turn signal side light melted bulb, new bulb will not work, dash light stays on if bad bulb left in, shuts off when removed to replace with new light, however new light will not work. If bulb or ...

Question about Jeep Wrangler

1 Answer

turn signal switch or a bad connection. When you try the turn signals, do they light up and not blink? -If so, probably the flasher unit. When you try the turn signals, does nothing happen? -Check the

turn signal/yellow light doesn't work. My front driver's side turn signal doesn't flash. The front side light and my back lights flash fast. When my headlights are on, my left turn signal indicator on

Question about Jeep Wrangler

1 Answer

...turn signal switch and still no blinkers. Checked fuses they are fine also. What else could it be? I assume you must have also checked the rear turn signal bulbs. You may have to start using a volt ...

Question about Jeep Wrangler

1 Answer

...ARE NOT WORKING I had the same problem with my 99 jeep. Turns out the turn signals, hazard lights and brake lights are part of the turn signal switch. I replaced mine and everything worked

Not finding what you are looking for?
1994 Jeep Wrangler Logo

427 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...