1992 Jeep Wrangler "95 engage 4" Questions

...95 Jeep yj wont engage. Goes into gear but doesn't engage. you can also check the 4 wheel drive vacuum switch on top of the transfer case...got mine for 10 bucks from parts store...fixed the problem ...

95 jeep wrangler the 4 wheel drive will not engage into 4 high or 4 low when you put the shiftter into the postion if feels like it goes in but does not engage and the light does not turn on either My

...ENGAGE ON MY 95 JEEP WRANGLER Try to replace the vacume lines to the actuator on the front axle? if its not the vacume lines i would go to 4wheelparts or danatrec and get a manual hub actuater that ...

...95 yj hard too start after i change my fuel pump 2 days ago.some guys told me that supose to solve my hard time too start in the moorning .. this morning (cold ) the fuel relay start too clic click ...

...95 jeep wrangler with a 4 cylinder engine. In order for me to start it, I have to leave the key in the on position for about 2 minutes or so until I hear a loud clicking sound which in turn will ...

...95 jeep wrangler and i heard a loud metalic pop. i then noticed that my 2 high was completely disengaged even though transfer case shifter had not moved. after comming to a stop and playing with it a ...

...95% of the power to the rear wheels, and only about 5% goes to the front during normal driving, so it's essentially in 2wd mode. When you put the transmission shifter into neutral, and pull your ...

95 GMC Sierra 4 wheel drive won't engage A couple weeks ago the 4-wheel drive in my 95 GMC Sierra quit working. It has the shift lever in the floor. The 4-wheel drive indicator light don't come on. If

...95 k3500 4x4,when i shifted to 4 hi,would not engage.never once heard any type of noise in the front end.replaced both actuators,fuse is,front will not engage.please advise.ken at 989-560-1906.or ...

...95 blazer it snowed heavily today i was driving the truck in 4 wheel drive pulled out of a parking lot and the 4x4 disengaged and what i mean by that is that it stopped working i got it to the garage ...