2002 Isuzu Axiom "torque converter" Questions

Ad

Question about Isuzu Axiom

1 Answer

...Torque Converter. it could be something small as a seal. that code alone doesnt do any good, without visually inspecting the Torque converter. in anycase, its not a job i recommend doing at home. one ...

Ad

Question about Isuzu Axiom

1 Answer

vehicles is the torque converter staying locked up. You need a scanner to check signal response from the PRNDL switch and TCC switch. To find a shop to help you go here: http://www.iatn.net/shopfinder

Ad

...torque converter on 2002 axiom. car gets approx. 20 miles per gallon. imediately after rebuild i am getting 12 miles to the gallon. nothing else has been done obviously its the transmission, but what ...

Question about Isuzu Axiom

1 Answer

to empty the torque converter. Replace the filter and the pan and fill to the proper level. Test drive the vehicle about 2 blocks to make sure everything gets filled and top off transmission as needed

...torque converter and is electronic. If I replace the fuse, the idiot lights will go off and the turn signals will work for about a day before it blows again. I have looked at all the bulbs and they ...

...rev up fast (in gear) but just no get up and go? You may have slippage in the transmission or torque converter. If it's a stick could be the clutch but that would most likely smell very bad as

...Torque Converter Clutch Circuithttp://engine-codes.com/p0740_dodge.htmlForum CodePossible causes- Low transmission fluid level - Dirty transmission fluid - Faulty torque converter clutch solenoid ...

torque converter and flywheel torque converter housing -- engine, (M10) 26-37 ft/lb (M12) 41-66 ft/lb Drive plate -- torque converter 30-37 ft/lb Torque converter housing -- gearbox housing (4 x M-10)

Question about Isuzu Axiom

2 Answers

...torque converter clutch solenoid P0741 MITSUBISHI - Torque Converter Clutch System Malfunctionhttp://engine-codes.com/p0741_mitsubishi.htmlForum CodePossible causes- Low transmission fluid level - ...

...torque converter clutch stuck or not working properly code 1744 Torque Converter Clutch System Stuck in Off Position Possible causes - Low transmission fluid level - Dirty transmission fluid - Faulty ...

Not finding what you are looking for?
2002 Isuzu Axiom Logo

486 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Isuzu Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...