2001 Isuzu Trooper "wrong car goes dead driving" Questions

...goes dead and 4wd, battery and one other light come on in the dash while driving then it come right again. Im guessing a wiring intermitent contact problem has occurred but where and how does the ...

...wrong or take car to a shop.? they know what to do, for sure. I have removed all the fuses in the fuse box in the cab and all the fuses and relays in the fuse box near the battery, fault still there. ...

...wrong LSI 4cylinder or 3cylinder? engine. , all answer USA cars. all answers now, are 3cylinder did the odometer quiet too? key fact and in USA< connect any scan tool and see if VSS died. the usa ...

car goes dead after setting without driving after two weeks. I have had three new batteries, a wiring harness and some kind of straps put on the possitive and negative and the dealership says they ...

...dead done this a week earlier but started right up what could be wrong not sure if this will help you out. Why Does My Car Stall While Driving or this one. What makes car start and then die ...

...wrong ? Battery dies overnight while sitting or when driving the battery goes dead ? Two different problems . Going dead overnight means there is a parasitic drain on the battery . ( something is ...

WRONG, see here 10,000 times. more www. driving a car the ALTERNATOR produces all Electrical power. 100amps x 13v is 1300watts, and runs ALL> when it dies the battery is sucked dry/dead/ discharged

...wrong when your altenator is good My car is dying while driving it, its idling rough as well, lights on inside dashboard are flickering, took altenator to autozone and it checked out as good...what ...

...goes dead so i replace the altetrnator drive it 20 miles amd it looses all electrical power again stereo and all dies has to be jumped off to recrank it what is wrong may also have a faulty circuit ...

...wrong. All you need to do is drive the car, hit passing gear a few times, pull off, let it idle, do some start-stop driving, and withing 10 miles the idle parameters will be reset We have to do this ...