2001 Isuzu Trooper "clunk noise car starts move" Questions

...noise when driving down the road. Sounds like it's coming from the front. The clunk starts when you start moving and and the clunking increases the faster you move. No clunking noise if your not ...

...starts moving in drive. Anytime i start moving in drive from a dead stop i hear a clunking in the rear of jeep. I opened the rear differential and noticed the ring and pinion gears were worn so i ...

I have a 90 dakota and its making a clunking noise in the rear end. When I jack it up the rear tires will rotate back and forth at least an inch before moving the drive line. When I put it in gear it ...

...clunk noise from right front 2003 Honda ody EX: I just replaced Front Right Bearing, followed by timing belt, water pump and other belts replacement (all within 15 days). Now less than a week later I ...

...car made clunking noises when backing up then got moving started making awful grinding noise wouldn't move anymore sounds horrible check for failed "U " joints or cv joints in the drive shafts front ...

car makes a big clunking noise when you first start to move Hyundai Sonata is a front wheel drive. When moving in a straight line,the noise will be from motor mounts,transmission mounts and stabilizer

clunk noise when coming to a stop could be driveshaft slip yoke binding.clean lubricate driveshaft slip yoke or slip yoke bearings could be worn. IT SOUNDS LIKE SUSPENSION TO ME PERHAPS A LOOSE SHOCK

clunk' noise when I press the switch, so it's obviously trying to engage something. SOMETIMES, if I press the 4x4 switch BEFORE starting the vehicle after it has been sitting all night, the front axle

...noise in the rear end after a wheel alignment, tire rotation, brake service, oil change etc. The rear end started to clunk especially over uneven road surface or bumps. It went in today and they ...

2003 Saturn Vue, noise when starting to drive, clunking noise. No vibration or noise if in drive with all 4 wheels off the ground. vibration and clunking can be the drive shafts universal joints if ...