1998 Isuzu Trooper "oil pressure" Questions

...oil pressure indication. First, you need to make sure there is the proper amount of oil in the crankcase... so check the oil, add if needed, then see if the problem persists. If so, verify that there ...

oil pressure located on a Trooper? Where is the oil pressure sending unit located? ('86 4LZD1) Isuzu SUV Forum https://www.planetisuzoo.com > threads > where-is-the... Apr 2, 2012 - Scroll down to the

oil pressure problem oil warning light came on lost engine power put oil in light goes out if revs are increased and gauge will show pressure there revs die off the light comes back on and oil gauge ...

...oil pressure stays at approx.30 psi regardless if engine is cold ,hot,idling or highway speed.Intermittent ticking or mild main bearing noise,no rhyme or reason to it.Could start right away or after ...

...oil pressure do they require to make them work at cranking the oil pressure has to be approx 5 mPa before they start to work electrically also, oil pressure at rail varies from 4 to 28 mPa. on Tech2 ...

oil pressure sensor location I have a 95 Isuzu Trooper 3.2 SOHC. My oil gage is telling me I have no oil pressure. I want to check the oil pressure sensor but I need to know where on the engine block ...

...oil pressure on my 94 Trooper flucuates from around 10 at an idle up to 55-70 when I'm driving down the road. I changed the oil sending unit when I changed my oil thinking they both might help but I ...

oil pressure Hi can anyone please tell me where the pressure relief vale is i am havung high oil pressure problems i need some sort of diagram it should be in the housing that the oil filter screws on

OIL PRESSURE WHAT SHOULD THE OIL PRESSURE BE IN THE MANIFOLD THAT DRIVES THE FUEL INJECTION 4-28 Mpa depending on revs and conditions The engine requires a minimum of 3.5 mpa (500 psi) of oil pressure

...oil pressure on the rail (injectors)? oil viscosity is very important, and yes if the rail oil pressure sensor is not reading correctly at least 3 to 5 Mpa while cranking the injectors will not be ...