1998 Isuzu Trooper "flywheel" Questions

fires is often a result of too much or tool little distance between the starter pinion gear and the flywheel. A high pitched whine during cranking (before the engine fires) can be caused by the pinion

how do i time the flywheel of 4jx1 engine just removed the flywheel and would like to fit it back while the bolt holes appear to be symmetrical you will probably find that all but one will screw in ...

just had new clutch and flywheel fitted,now wont start,is there a specific place for timimg the flywheel No timing of the flywheel to the starter. Flywheel does not affect ignition timing. No, there ...

in the automatic isuzu trooper 4jx1 they have also a timing mark in the flywheel? thank you yes auto or manual vehicles must have the flex plate (Auto), flywheel (Man) installed in correct position ...

how do i set flywheel timing on a 3ltr diesel isuzu trooper #1 on TDC and the small cut out in the flywheel sits at 6o'clock.

trying to replace a water pump on 1986 trooper II how do you hold the flywheel to get the crank pulley off? Use an impact wrench, this eliminates the need to hold the flywheel steady.

does it matter how you put the flywheel on OH YES IT DOES!!! look on this sit and it will show you EXACTLY how to put one in. :) PLEASE RATE THIS!! James Boothhttp://www.vw-resource.com/flywheel.html

...top cam belt cover to check that cam gear is timmed on mark at 12 O clock there is notch in edge of flywheel that should be put at 6 O clock (facing down) it is hard to see with flywheel on engine ...

flywheel and presser plate torque specs for a 1991 isuzu trooper with 2.8l v6 The flywheel bolts call for 52 lb-ft, the pressure plate calls for 13 lb-ft. Tighten in a diagonal pattern, one or two ...

1998 izuso trooper 3.5 automatic, flywheel seems to be broken away from crankshaft. I can turn the harmonic balancer and hold the flywheel with a screwdriver and it turns without moving the flywheel? ...