1998 Isuzu Trooper "98 transmission sensors" Questions

Ad

Question about Isuzu Trooper

1 Answer

...transmission speed sensor is located on the '98 Rodeo and how to access it? Thanks My uncle has an 92 Isuzu rodeo. He tells me that it stops running and looses power when it warms up. He was told the ...

Ad

transmission fluid I have the same problem with my '98 Trooper - the TOD light, that is. Took it to a good shop for diagnosis. They said the TOD sensor was bad and it would cost abot $480 for the part

Ad

...98 Blazer/Jimmy transmission, or you would want to find the code "8TAD" on the laminated sticker next to the vent tube, or on the underside by where the 2wd transmission mount bosses are. The 96-97, ...

... where is the crank sensor located on the 98 carava... Where is the crank sensor located on the 98 caravan 3.0 The crank sensor is located on the top side of the transmission about 11:oo clock ...

Question about Isuzu Trooper

1 Answer

...98 cavalier is behind the engine toward the passenger side mounted onto the transmission with one nut and it has a plug with 2 wires on it. Can be easily accessed by jacking up the car and removing ...

Question about Isuzu Trooper

2 Answers

...98 Ford Contour and these codes. - P0708, P0171, P0442 p0708 is transmission range sensor curcuit high output, p0171 is system to lean ( bank 1 ), p0442 is EVAP emission control leak ( small ). code ...

...98 ford escort (automatic)? It is mounted on the transmission. Hope this helps and best wishes. I have a 98 ZX2 Automatic and the speed sensor is located on the backside on top of the transfer case ...

Question about Isuzu Trooper

1 Answer

...My speedometer / odometer has quit working. Does anyone know where the transmission speed sensor is located on the '98 Rodeo and how to access it? Thanks i think near rear of trans near output ...

...computer says transmission fluid hot 98 degrees does this mean my transmission is slipping on my grand prix 2005? could be tranny sensor that helps it shift now a days everything has a sensor on

Transmission code p1763 for a 98 Dodge Durango CODE P1763 - GOVERNOR PRESSURE SENSOR SIGNAL HIGH.POSSIBLE CAUSES SIGNAL WIRE SHORT CIRCUIT TO POSITIVE,VOLTAGE SUPPLY WIREOPEN CIRCUIT,TRANSMISSION ...

Not finding what you are looking for?
1998 Isuzu Trooper Logo

462 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Isuzu Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...