1997 Isuzu Rodeo "remove valve cover" Questions

valve cover. Remove the wire connector from the coil-remove two screws holding each coil to valve cover-carefully pull coil up away from valve cover. If it is stuck-slightly rotate coil back and forth

knocking under the passenger side valve cover and losss of oil pressure remove valve cover and replace bad lifters, Replace cover.

...Remove or disconnect the following: Negative battery cableIntake Air Temperature (IAT) sensor connectorPositive Crankcase Ventilation (PCV) valve and hoseAir intake assemblyUpper radiator ...

...valve cover you we be able to hear which rocker is ticking then remove cover and adjust. You have to move the timing mark to TDC to start, Check your manual for instructions Depending on which valve ...

valve cover. changed oil, mobil 1 10-30 synthetic, no help added quart lucas no change. Do valves need adjusting? If so does intake manifold to be removed? It is a 6 cylinder sonds like you may need a

...valve cover gasket. Not too difficult of a repair. While is have not worked directly with the engine you need to start first by disconnecting the ground to the battery. From here examine your engine ...

...valve cover gaskets 1999 rodeo this is a preaty easy job if you dont have to much to remove it get to it.. i havent change them on a isuzu but they are all about the same make sure you get everything ...

I need a diagram on how to change a valve cover gasket on my 1995 Isuzu Rodeo. your not going to find one but theres nothing to it just remove anything thats in the way then the cover.

valve cover gasket, and valve adjustment procedure.... so this engine should be an 6VE1, this has got shims on top of the valves. So best to go to dealer for this unfortunately. I would only recommend

...must remove the radiator fan, drive belt or belts, possibly valve covers, the harmonic balancer, and then the timing cover. This is the time to change the timing belt and tensioner and idler as