2004 Honda Civic "changing low beam bulb" Questions

...low beam is out but high beam works fine only the high beam works on my drivers side, not the low beam. 1999 honda civic Sounds like a bad bulb or connector to the bulb. I would check the connector ...

#39;t work on 1997 Honda Civic high beams DO work If your high beams work and your low beams do not work... try changing the light bulbs first. The low beams can burn out and the high beams still work

...low beam bulb on a 2005 Honda Civic SI? Disconnect the 2P connector from the headlight. Turn the low beam bulb socket 45°counterclockwise to remove it from the headlight. Install a new bulb in ...

...low beam, no daytime lights and no high beams High beams dont go on at all? Does the DRL light dissapear when u turn on the headlights? Now, because your high beams dont work, it more likely means ...

...low beams are fine Switch to highbeam only one works. USED to sometimes kick in all of a sudden (usually when going hard around a corner or over a bump), doesn't any more. The highbeam light on the ...

low beams don't work on my 1996 honda civic. I have replaced the fuses and they still dont work The most likely cause of both low beams not working, besides the headlamp bulbs is the head light switch

...low and behold: My headlights worked ($70 for bulbs my A$$.)So in short, first get to the directional plug and clean the contacts. You may not even need to have the switch changed out. But if you do, ...

...my 04 civic how do I change the bulb on the drivers side its the low beam bulb open the hood, few clips or bolts un do them take out lamp thats out and insert new one and then put it all back ...

...low beam on my honda civic ex 04? I am trying to figure out how to access the light bulb and if I need a scredriver or if it just pops out after pulling on the dealio in there> You to turn and ...

...changing how the high-low beams and the flash function works wouldn't be that difficult. Anyone who can read electrical diagrams could show you how and where to cut & splice and there may be an empty ...