2004 Honda Civic "ball joint" Questions

...ball joint from a 98 Civic how do you remove an upper ball joint from a 98 Civic? Removal & Installation The upper ball joints cannot be replaced separately. If the ball joints become worn or ...

...ball joint on my 1997 civic. Since then my front end wobbles back and forth, mainly at low speeds, and ususally after turning left. Clearly something is loose and or wrong.....what do I do? When you ...

...ball joint come out of the knuckle i was told i would have to by a new knuckle that the ball joint is built in to them and cant be removed is this true hi yes this is true you will have to buy the ...

...ball joint, 98 honda civic This is a pretty easy job.The way i do it is take the two 14mm bolts louse from the strut on the inner fender well,then take the 17mm bolt out of the bottom of the strut on ...

ball joints front end how to remove them better to change the whole control arm but if you just want to do the ball joint go to auto zone and rent the ball joint press! good luck

...Ball Joint Removal/Install. I was in the middle of installing new breaks, and out of no where the front lower ball joint just pops out of place? Now its pushing up againts the cv joint/axle. What is ...

...ball joint. RIGHT AWAY have the ball joints checked because...... They are known to get tight and fracture the ball joint stud which means the wheel and brake assembly will separate from the car ...

...ball joint bolts or accidentally hit the rubber ball joint boots with your hammer. You hit it hard and with good aim. Check frequently to see if it has broke loose while you're striking it. The part ...

1996 honda civic trying to get the upper ball joint off The upper ball joint will be fixed.. you have to buy a complete new A-arm. This was the case on my 00 Civic 5 door.

need to take off upper ball joint on honda civic get manual at local library you need a ball joint tool remover you can rent it at most auto parts stores.