1998 Honda Civic "remove spark plug lead" Questions

...spark if you have the type of distributer that has no coil lead going to it and has four plug leads only then there are two possabilitys easiest way to check it out is to remove the distributer then ...

...remove a plug lead and hold it 5mm away from the engine and have somebody crank it over. You should see a healthy spark. If no spark or a weak spark take out the center lead on the distributor and do ...

...to start, have checked all earths and feeds to ECU, cleaned Dissy cap and checked HT leads - OK, removed fuel injectors and actuated - OK, replaced spark plugs (Old ones filled with petrol due to ...

...remove the spark plugs one at a time as well disconnect the ignition coil lead so it doesn't start when you turn the engine over during test. Easier with two people. You will find that if two ...

...remove the belts and the pully and if so you would need a stong impact gun or honda crank pully holder and a breaker bar i would look here first i think it is behind there, unplug and unbolt this and ...

...remove the spark plugs one at a time.. the spark plug of the cylinder that is leaking will be cleaner than the rest of them. Just note that if you find that there is a lot of water exiting the ...

...spark from the #1spark lead jumping to ground with an old plug in the end of the wire. Another way is to drive and then stop to advance the timing at the distributor until you hear pinging on full ...

remove the spark plug. Push the spark plug back into the plug lead. Using insulated grips or pliers hold the threaded section of the spark plug against a metal section of the cylinder head or cylinder

how do you remove the coil rail to get to the spark plugs Remove spark plug leads, get the right sized deep socket and unscrew old spark plugs, screw in new spark plugs, plug in spark plug leads, DONE

...remove spark plugs from both cylinder heads.Refit Set gap of each new spark plug to 1.00 mm . Fit spark plugs and tighten to 25 Nm (18 lbf.ft) . LH bank only: Connect ht leads. RH bank only: Fit plug ...