...98 Windstar...3.8 with the ... Our community is here to help you with any questions you have related to your Ford. ... Lower Intake Manifold to Cylinder Head Bolt 8-12 - (71-106). Torque ...
head bolts torch specs on 98 toyota v6 heres the torque specs and the way to tighten the head bolts for your 1998 toyota sienna, hope this helps, 12 point bolts step 1- 40 ft lbs step 2- additional 90
...torque sequence 99 chevy malibu v6 3.1 engine, head bolt torque is-- 98 through 2001 is step1- 37 foot lbs, step 2- rotate an additional 90 degrees (1/4 turn). the rocker arm bolts are 168-in.
Question about Honda Civic
...head bolt torque and cam shaft torque settings Torque setting Toyota Land-cruiser 80 Series 4.5 1995-98 Engine code: 1FZ-FE, 1HD. Stage 1: 20 Nm (Start tightening bolts from center to outwards) Stage ...
...head bolts on a 98 hyundai elantra The cylinder head bolts need to be torqued at 10MM bolts 22 FT-LBS 12mm bolts 26 FT-LBS + 60 degrees and then another 60 degrees.That torque will leave a blown ...
head Bolts all step 1 = 88-98 Nm, 65-72 lb.ft 147 mm, 5.8 inch bolts step 2 = 85-95° 119 mm, 4.7 inch bolts step 2 = 70-80° Cylinder head Sub Bolts step 1 = 34 Nm, 25 lb.ft step 2 = 44-54 Nm, 33-40 lb
...head bolts and torque in sequence as follows: Step 1: 72 ft. lbs. (98 Nm). Step 2: Completely loosen all bolts. Step 3: 26-32 ft. lbs. (34-44 Nm). Step 4: plus 90-95 degrees ...
head bolts and torque in sequence as follows: Step 1: 72 ft. lbs. (98 Nm). Step 2: Completely loosen all bolts. Step 3: 26-32 ft. lbs. (34-44 Nm). Step 4: plus 90-95 degrees clockwise. Step 5: plus 90
head so i need the specs The 98 Corolla has a "torque-to-distance" spec. First, torque all 10 bolts to 36 ft lbs (49 NM or 500kgf-cm), in a clockwise fashion, starting with the 2 center bolts. Second,
1,504 questions posted
Usually answered in minutes!
1,130 Questions
758 Questions
811 Questions
722 Questions
687 Questions