Question about Chrysler Town & Country
...AC high pressure switch tripping. 1999 Jeep Grand Cherokee seems to have a restriction in the AC system. High pressure switch tripping, cutting off compressor clutch. did you add freon to your system ...
...ac is working and compressor is on good pressure ranges from high side the red hose 160 to 230 depending on temperature outside; low side blue hose 27-46 low side depending on outside temperature, ...
...ac on my 2000 jeep cherokee blows cold most of the time but occasionally it stops working...it will blow cold again after a few min but sometimes it takes alot longer. I was told it was probably the ...
Question about Chrysler Town & Country
...high pressure switches to pcm and computer still does not ground ac compressor clutch relay? the AC compressor has a "shutdown switch" when not enough refrigerant is in the system run a wire from the ...
...high max ac unplug the green wires or wire on the compressor right behind the belt pulley,check for 12v dc,if none,you lost a relay or one of the pressure switches,fuse,maybe broken wire,if 12 v. is ...
Question about Chrysler Town & Country
does a 2002 jeep grand cherokee have a low pressure ac switch Yes.It should be one of the ports on the compressor or the lines to the condenser. The low side port is smaller than the high side.
...AC clutch compressor RELAY, freon level is good, temperature sending unit replaced along with cooling fan! Checked all fuses still good. Can't seem to get compressor to kick on? Please help! SOS! ...
Question about Chrysler Town & Country
high pressure switch replacement getting alot of diagrams for 98 and 02 jeeps but not the one i need, the switch is three pronged, the one i get from the parts guys it two pronged, whats the deal here
Question about Jeep Cars & Trucks
...AC clutch operation. The high pressure switch should be closed at pressures below 270-330 psi Hello Lance Pickett, If everything you describe is good & correct... It is time to test the magnetic ...
...AC system so I can bypass the High Pressure Switch in order to leave the compressor on so I can charge the system with R134a. Just unplug the switch and put a jumper wire in it , that will turn the ...
1,137 questions posted
Usually answered in minutes!
1,229 Questions
1,289 Questions
1,079 Questions
746 Questions
565 Questions