2006 Chrysler PT Cruiser "taking back door panel" Questions

...back into the door latch. it may not appear to be worn or broken, and it is still a mystery to me why it pops out. I think my wife is too agressive with her door opening. It only happens to

...back door. If it is the back door, make sure someone didn't accidently flip the child lock. If the child lock is not the case you will likely have to remove the inside door panel (along with armrest, ...

...back hatch door. the automatic locks unlock the doors, the button on the drivers side pops up but i cannot open the door from the inside Is there anyone who can help me The headlight, brake and turn ...

...back door switch work intermittently or just the driver? yes i have this problem to also the child lock engages even when it is not enaged yesterday i opened the troubled door and now it won't ...

back left side). 4) I found that taking a very small, thin screwdriver that I use for glasses screws worked well. You'll see a small rectangle opening in the top (where you'll be able to read the "20"

Back door won't open on 2008 GMCYukon need to take door panel off Back door won't open on 2008 GMCYukon need to take door panel off You should be able to unbolt the hasp on the door frame to open ...

...taking the door panel off my 525 bmw You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be ...

...taking all the screws out. Some are hidden behind black covers including one behind the door handle. My problem is now getting the door panel back on to the door. Haven't figured out how it goes back ...

taking out door panel 2002 pointiac montana i Need to take it out to check is the switch is bad because driver windowns wont go down i allready check fuse and is good i started to take out door panel ...

back door panel removal Got a slight dent on the back of my 2006 toyota sienna xle and I believe if i can just remove the back door panel, I should be able to push it back the dent without problem. ...