2006 Chrysler PT Cruiser "brake lights always working" Questions

...brake light stopped working. bought 2 new "bulbs" neither of them work either. psgr side works fine always has?? original bulb does not look burned out Ok you can't tell anyone, but I changed the ...

brake lights My break light stopped working on the drivers side. The tail light would come on, but when I stepped on the break the light went off. I replaced the bulb with a 3157 per the owners manual

break light is not working Not working can mean two things for brake lights always on or always off always on - this means the brake light switch is broken always off - the bulbs are the likely ...

...lights...the brake mechanical system should not effect the electrical system. Look under the dash at the top of the brake pedal for the brake pedal switch - there maybe a way to adjust the switch so ...

brake lights always on when transmission out of park Brake lights work OK when transmission in park, as soon as you go in gear, rear brake lights come on. Upper stop light is disconnected as it filled

...brake lights will not turn off Check the brake light switch on the brake pedal. It may need adjusting to allow brake lights to go off. The plunger on the switch needs to open when pedal is depressed, ...

Abs/Brake Light stays on. I have new front brakes, and the ABS does work although the light is on. I Reset the module, the warning lights always come back on. Any ideas? I would suspect a speed sensor

brake lights are inoperative, replaced or adjust the brake switch.Symptoms: - Engine Light ON (or Service Engine Soon Warning Light)- Brake lights inoperative check to see if your brake light work, if

...brake light is always on and the ABS light is always on what does this mean The amber ABS warning light is telling you that there is a problem with the ABS system. When the antilock brakes don't work ...

brake lights dont work (95 Tahoe) but have signal and running lights and top brake light good fuses Sounds like the turn signal switch. Top brake light is wired direct so it will always work.