2005 Chrysler PT Cruiser "resetting engine light" Questions

...engine light by disconnecting the battery cable. When I put it back on the car wont start and gage needles are jumping As I know disconnecting battery cable cannot reset engine light.Engine light on ...

engine light came on. Shortly after, gas cap light. Replaced gas cap and reset. Today bith lights came on again. are you fueling car with key "on"? That will cause light to come on. Disconnect battery

...engine light came on car died dis connected battery to reset light engine check engine light comes back on when you turn on the key and will not start. turn key on light is steady short time and then ...

...engine light go off on its own? Not sure on this vechile. Some will if it's a simple problem like a gas cap, but others will need to be reset. So whoever told you the code might need to erase it from ...

check engine light comes on BRING TO GARAGE GET FAULT CODE/RESET ENGINE LIGHT

2005 chrysler pt non turbo p0031 p0037 changed asd relay still engine light on engine light on replaced sensors and relay Disconnect your battery and then reconnect it will reset It work for is

...engine light on cylinder 1 miss fire, read on the net changed plugs to Champion RE14MC copper plug and also changed wires at this time, reset engine code, within 1 day engine light on again, cylinder ...

engine light on a pt cruiser after repair You can remove the negative battery cable for 30 minutes. This may or may not reset the ECU. If not then you will need an OBD2 scan tool to reset the CE light

...engine light goes on for a few days and then resets itself Light goes on then after about 6 starts it goes off. this happens intermittently. light is steady, not flashing. Car runs fine. It's a 2008 ...

...unplug batery cables conect the positive cable with the négative cable for 10 sec than reconect them to there proper position on the batery and your check engine light should be