2007 Pt Cruiser I Changed spark plugs 2 weeks ago Bosch Platinum +4, car is non turbo 2.4 ltr engine. within 1 day engine light on cylinder 1 miss fire, read on the net changed plugs to Champion ...
Question about Chrysler PT Cruiser
...week without then start again. cold temp. might affect it,not sure.also undercarriage wash may kill engine at idle engine may stop. may miss for ashort time or once every 40-50 miles.thanksfor any ...
Question about Chrysler PT Cruiser
...missing it would set a code, trust me on this fact. More than likely the engine is idling rough with the additional load of the AC compressor. This can be caused by many thiongs and you will need a ...
engine dies when idling in drive when waiting in traffic engine miss starts and than dies off Is the check engine light on, and have you checked the computer for trouble codes ?
...in gear foot on the brake, the engine acts and feels like its missing. once you accelerate again all is well. turn the air off and the engine runs great. your engine need tuning to higher idling
2005 pt cruiser engine lite comes on then the car loses power feels like miss fire when check engine lite goes of car runs great until the next time you need to have this checke out at ashop theycan ...
Question about Chrysler PT Cruiser
...engine light comes on got time to check car timing belt in tack no missing teeth upper gears still turn got fire got 60lbs of pressure to fuel rail engine spins but acting like to freely or no ...
...missing ground wire be causing my issue, and if so, can I just make a new ground? Hi there, My name is Steve. I can tell you that the barometric pressure sensor can, in no way, effect the temperature ...
...engine light came on.. its still missing real bad and lights staying on.. any ideas as to what this could be? you can start by going to Advance Auto they will scan it for free and tell you what the ...
Question about Chrysler PT Cruiser
...engine is missing. could it be timing off or bent valves check engine light also on The easiest way to test this is to carry out a compression test. This test will determine if any valves are bent. ...
1,119 questions posted
Usually answered in minutes!
1,198 Questions
1,147 Questions
1,007 Questions
816 Questions
582 Questions