2005 Chrysler PT Cruiser "cut cable broken power door" Questions

...things not work. To repair wire cut wire at pinch. place shrink wrap on wire solder wire slide shrink wrap over repair and heat it.If boot is bad replace it. Remove neg - cable before cutting

...PILLAR AND TEST FOR POWER SUPPLY.IF THAT IS GOOD.COULD HAVE A BROKEN WIRE INSIDE THE DOOR JUST LIKE MY AUDI A4.(POWER CABLE CUT JUST AS IT WENT INTO THE DOOR) HOPE THIS WILL BE OF SOME HELP TO

cut tube with a razr knife so you can see if any of the wires are broken now if there is no wires broken now the power door lock actuators inside the front right-and left door could be bad or the door

...broken off and do not make contact. Also check that you have good and tight positive and negative battery cable connection to the battery posts. Wiggle the cables a bit. If it still does not work, ...

...antenna and keep up. Help. The drive cable in your power antenna is broken. You should be able to unplug the motor or cut the ground wire. The motor is on the bottom of your antenna, under the

...cable goes from the body to the door. You will probably have to remove the door's interior trim panel for testing and inspection. Visual: a wire with a nick in the insulation surrounded by a greenish ...

...cut in and work, and then other times it will not. When I am driving, there is a clicking noise coming from the panel. Any ideas before I take it to the dealer? hi i had the same priblem myself, its ...

...cut and will cause alot if issues, without burning a fuse ! Check the switch output in the drivers side door for proper operation of the other doors, windows, and locks. It should control all the ...

...cable runs about $70 from the dealer but I repaired mine. You cannot simply splice at the break because the break occured at the max stress point. Use a new piece of wire - I cut open a heavy duty ...

...cut with a knife that hose so I was able to see inside and repair the borken cable. I put another cable to fix it, it took me about five minutes, no more. Repair costs: $ 3.00 of black silicon sealer ...