2005 Chrysler 300 "turn wheel fully hear grinding" Questions

...wheel drive, but now that doesn't work, I have so many miles that maybe ware pads in transfer case could be worn, but not sure. Some times when I turn left and right noise would go away. Noise is ...

wheel on the engine lines up with the gear on the starter in the area where the teeth are missing, having nothing to solidly grab to turn causes the grinding noise your hearing. When the problem first

...wheel bearings at first and they seemed to be fine; no play at all on either side. so i spun them both by hand and checked to see if the front drive shaft was spinning and it was. The transfer case ...

...fully. If your car doesn't have ABS, the caliper may be sticking in and the noise and vibration are from the pad being loose between the caliper and the rotor. Take the wheel off and watch the pads ...

...wheel could be faulty, probably it is seized, or battery doesn't have enough power to make the solenoid fully pull mechanism (check battery amps charge if low. You may need to look at the starter as ...

...fully disenganged and front end clunks when slowing to a stop. When turning front end grabs like it is still in 4wd. This has happened in the past and goes away over time until I use it again. What ...