2005 Chrysler 300 "happens serpentin belt goes" Questions

...belt and pulley myself now the ac blows warm sometimes i push the gas and the mph gauge goes up real fast and also seems like it doesnt want to start almost like the starter is it possably that it is ...

...the car without the timing belt. So if you only have one belt on the system do NOT try to start your car. Off to the repair shop it goes so they can line up the timing again, and replace the

...start troubleshooting the problem. REPLACE THE TENSIONER IDLER PULLEY.THE TENSIONER IDLER PULLEY MAINTAINS THE BELT TENSION WHEN IT GOES BAD.THAT WILL LEAD TO LOOSE BELT TENSION CAUSING BELT TO

...happens when you're belt tensioner goes bad on a 1997 gmc Jimmy 6 cylinder put new plugs and wires it sounds like a lawn mower belt tensioner doesn't have tension therefore serpentine belt sqeels ...

dodge dakota check gauge light comes on and battery meter goes to 0 Check your Serpentine Belt, if your belt Brakes.. that is exactly what happens.. Of your Alternator Failed

...pulley at full slack and it still won't go on. Any tips? You might have the wrong belt. Try this put the old one back on if it goes right on then you might have been sold the wrong belt happen to

...belt/pulleys/water pump. When starting the motor there's a loud noise, this only happens when it's cold and eventually goes away after after ~15min of driving. The sound appears to come from ...

belt if it looks straight at someone rev it a little bit at a time to see if it goes off balance and so one of the pulleys could be bent or perhaps Sharp cut into one of pulleys may also contribute to

...belt systems can also have automatic tensioners that wear on the pivot. This also allows the tensioner to tilt into the tension. One of yours is doing this. No other reason for it. Hope your repair ...

the 16v motor Happens to me all the time. Look closely at the diagram. here you go: heres a diagram to show you how the belt goes on, also make sure you have the right belt and pulley size is the same