2005 Chrysler 300 "check light" Questions

...CHECK BRAKE LIGHT SWITCH MAKE SURE BRAKE LIGHTS IS ON.IF NO CHECK BRAKE LIGHT SWITCH FUSE IF POWER GOING TO BRAKE LIGHT SWITCH AND BRAKE LIGHTS DONT WORK REPLACE BRAKE LIGHT SWITCH.IF BRAKE LIGHTS ...

check engine light codes flash 9 times When the light comes on, one or more diagnostic trouble codes (DTC) are stored in the engine control module. These DTCs remain even if the light goes out. To ...

...lights.The shift interlock usually operates off of a signal from the brake light switch.If you have no brake lights check the fuse to the brake lights and if they are good suspect brake light

check the brake light switch, this switch is located on the top of the pedal arm, if the brake lights work then you will need to check the release solenoid on the shifter, this is where i would start.

...light to check for power to one side of the lamp.  If that is the only light out it probably isn't a fuse, but it is worth checking it anyhow.  You might have to look for a broken wire ...

light check to see if there is power to the wire at the plug where the bulb is for the blinker. if so the socket is bad. if not check to see if the light assembly is working for ex. the parking lights

...to see that your brake lights work. If not check/change the fuse for the brake lights. The brake light switch may be broken or mis adjusted as well. Check your owner's manual for bypass

light reset Check engine light rest please. I've tried what a mechanic told me to do & no go. Light still on. They said to take off positive battery cable and let sit for a few minutes and

...lights are on but they aren't. Check bulbs, switch is on and indicating they should be opn, fuse is good. Check the headlight or fog light relay, I believe located in the fuse box. It could be

...check light They have been on all vehicles for 32 years,so we'll continue & let your study that part on the internet You get any dash light that stays on after the motor is running, you check for ...