1997 Cadillac DeVille "tps" Questions

Hey how ya doin my 87 cadillac deville has told me that my TPS is misadjusted (code E22). How do i fix this problem or do i have to replace the TPS. It also says the circuit is open on the TPS (Code ...

...what could be the problem and it shakes a little bit It may be the throttle position sensor (TPS). It is located where the intake air (from air filter) attaches to the intake manifold. The TPS ...

changed the ISC and new plugs, wires. Also have cleanded the carburator, what would cause this? The tps and isc motor have to be set a certain way to work like they are supposed to. The voltage output

How do I replace the TPS on a 97 Cadillac Deville? The TPS is on the throttle body. Remove the old one and reinstall the new one. Next set the voltage to 1.5 at the idle mode with a ohm volt meter ...

trouble codes MEANINGS Was wanting to know if any one knows what codesE22,E70,E98 MEAN Code 22 OPEN TPS SENSOR CIRCUIT , E 70 INTERMITTANT TPS SIGNAL, E98 DRIVER CAUSED PARK / N TO DRIVE motion by the

...SUPER HIGH...LIKE IN THE 2000-2350 RANGE! WHEN I CHECKED THE CODE IT READ P0122. IF I REPLACE THE TPS SENSOR WILL THIS CORRECT THE PROBLEM OR IS THERE SOMETHING ELSE TO IT? Likely your temprature ...

...error code E30. Anybody have any ideas?? The error is indicating that the Throttle Position Sensor (TPS) is out of the normal range with respect to the Idle Speed Control (ISC). Try something really ...

after changing the TPS sometimes the car will not downshift and at times it will what could be the problem? A verity of thing's could cause shifting problems , besides TPS ! You best bet would be to ...

...p0405 I have a 98 DeVille with codes p0122 and p0405 that set simultaneously. I have replaced the tps sensor, the tps connector, and checked wires from egr as far back as I could. Everything looks ...

...dead, no power at all. Hello, I am thinking a couple of things here: 1. Throttle Position Sensor (TPS) Solution: hold the gas pedal to the floor and try to start the vehicle (if a clutch make sure ...