...tv is on but wont play anything else.it dont respond to the channel change buttons or any button to be precise.it only responds to the on and off button on the remote.the tv only shows a blue screen ...
Question about Televison & Video
...tv is stuck on 1 channel. i canot see my digital channels, the tv is stuck on one channel (BBC3) and it wont let me change it. i have atempted to press the 'd-menu' button for the restart but that is ...
Question about Haier Televison & Video
...default mode. Also make sure you have a working signal by trying another TV on the antenna or cable coaxial wire. If these steps do not work, call the Haier hotline listed in the manual: ...
TV W/VCR & NO REMOTE. WE ARE USING A UNIVERSAL REMOTE BUT IT ONLY GOES FROM CHANNEL 3 TO 61 & THEN SAYS "AV INPUT". WE HAVE IT HOOKED UP TO CABLE BUT CANT GET ANY CHANNELS ABOVE 61. WE THINK MAYBE THE
TV power button for five seconds. 4. Plug the TV power cord back into the power outlet and turn on the TV. 5. Open the on-screen menu to confirm that the TV is responding again. 6. Turn off the TV and
...TV, it only finds channels 1,4 and 5. When I watch it auto tuning, it finds channel 3, but doesn't store it. I have set it to PAL-I, which I believe is correct for the UK. I have another TV which ...
Question about Televison & Video
...button it will only change the channels for a short time then it stops. Cant find how to fix these problems in manual please help. The problem is not in the remote,is inside the TV,it might be memory ...
...tv is plugged in and I try to run a channel scan it goes to #36 and jumps to #98 , 99 and back to #2. I have seen online that this a commmon problem with this model, but I have not seen any solutions ...
TV mode, press Menu button, use left arrow key to go to "Program Table" (NOT "install") and press blue button for "APS" (auto program search) This was for the LCD22ADVD but may work for others such as
Question about Coby Usa Televison & Video
TV). After all the tuning procedures, the Coby TFTV992 shows the on display message: PLEASE RUN CHANNEL AUTO SCAN. Am I doing something wrong? Thanks. Carlos Kulps [email protected] 1st click the
5 questions posted
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions