2005 Isuzu Ascender "wipers working low speed intermittent" Questions

...wipers only worked on hi, not low, not intermittent, and didn't return home.  What I found was the wiper hi-low relay was bad (in the panel under the hood).  Replaced it and hi and low ...

...wipers on low and they work. You can turn them to high and they work. Now, if you initially turn them to intermittent, they don't work in any intermittent position. If you switch them from low speed ...

...wipers don't work and intermittent setting causes the blades to stop in the middle of the windshield. Is this a multi function switch problem? Yes that is likely a switch problem. Before you buy any ...

...wipers, low speed, and high speed. There are not 3 relays, but 1 for all functions. If you have power to the high setting, the relay is working. That's normal on some cars. Did it ever work ...

...low and high wiper speeds still works. The wipers also fail to work when the windshield washers are activated. Would this be a faulty switch on the steering column, a relay, or something else? could ...

...low and high speed is okay, but the intermittent wiper does not work. Neither do the wipers work when I use the washer or they wipe but stop when I let go of the washer. I tried the wiper relay to no ...

...wipers work but interminent settings don't most likely cause is the wiper switch has gone bad and unable to 'time' the intermittent speeds.the intermittent speeds work on a resistor type ...

wipers are possessed. High and low speed work fine. But when you turn on Intermittent wipers, regardless of speed setting, it jumps around through all speeds. From very slow intermittent to high speed

...windshield wiper does not work on INTERMITTENT or LOW SPEED but works on HI SPEED but does not stop at the park position. Fuses are good. replace the motor.it will stop being goofy after that i ...

that has failed. Windshield Wiper Switch MOTORCRAFT SW-5665 That's normal on some cars. Did it ever work intermittent at hi speed? My car is wired to go intermittent only at low speed. Hope this helps