2005 Isuzu Ascender "piston backwards" Questions

...backwards, you could have bent some valves or even damaged a piston head. Starting requires 3 things. Fuel, air and fire...make sure you have those 3 things going on correctly simultaneously and the ...

...hand treads. hi there after taking the wheels off undo both bolts on the brake caliper wine the piston backward make sure see if the piston is winding backward may need some force also make sure ...

...piston isn't moving up or down just moved the arm forward and backwards. HELP!!!!! Possibly dropped something in it that is causing the crank to be jammed. I'd take the engine off and go all the way ...

piston and keeping the engine from turning over or a rod may of gotten bent/broken. you could try taking all the spark plugs out than try rotating the engine backwards if it moves backwards try moving

...the jammed wheel and carefully examine to see why is it so. Grease the caliper pins, free up the pistons and reset the brake

...piston backwards for clearance. Try and pry evenly as not to **** the piston in the caliper. I hope this may have helped you. Wayne you need to turn the piston while pressing the piston. There are ...

...fluid, if the tranny fluid is low that could help cause the conditio but its most likely the B2 piston going out. The 2 pistons can be replaced while transmission is in the car its the best place ...

...backwards by hand and the starter will turn the engine over until it hits that spot again. What could it be?! Either a piston pin or a conrod sheered off and the piston got stuck in there and blocks ...

...backwards while pushing the piston in. I picked mine up for 10 bucks and it's a cheap one. Better then buying a $90 kit to use. the tool is a rear disc brake caliper piston retraction tool, ...

a little thinking about the piston as you tighten it, do not want to put any lateral force on it just push it in. May want to take the top off the master cylinder too when you push the fluid backwards