...if your wheels are torqued properly, and there is no corrosion between the mating surface of the rim / brake rotor, the noise is likely in the axle (constant velocity shaft). as it gets worn,
lug nut torque chart torque specs for 1997 ford f150 for lug nuts on rims wheel nut torque is 100ft lbs.
...torque to 80 ft-pds . That is because the lugs can loosen . This is especially true with aluminum rims. The reason you carefully torque the wheels is so your brake discs/rotors do not warp when
Why do my wheel studs on the driver side keep breaking? does it have the stock rims or aftermarket rims.??? Are you maybe over torquing the lug nuts , when you put the tire back on . Good luck
Bmw x5 wheel wobble at 60mph changed ball joints, tie rods, new discs Rim not mounted right ,out of balance on wheel or worst case bent rim.not torqued right.
Question about Pontiac Grand Prix
IF you change a rim out that has a SVC monitor , can it be moved to the new rim? Yes, if you replace the seals & gaskets to the tire pressure sensor (TPMS) & torque it correctly
What is lug nut torque spec on 2011 toyota camry Steel rims 100 foot pounds, aluminum rims 110 foot pounds. This will hold them on.
Question about Cars & Trucks
torque specs for upper and lower strut bolts and for aluminum wheels. Thank you What is the Car Year Make and Model? Are they Factory Wheel? if not check with the after market rim supplier and rim ...
Question about Pontiac Grand Prix
...checked with a torque wrench and increased to 90 ft/lbs. The alum rim does not appear to have any deformity in the holes. The steel winter rims do not have this problem. Put anti seize and
...with a good ballpeen hammer and wiggle them out, **** the new one in place with lots of big washers and socket and torque handle, then torque your wheel nuts with rim on to 85 ft lbs. GOOD LUCK, ...
1,556 questions posted
Usually answered in minutes!
1,496 Questions
1,236 Questions
1,211 Questions
1,043 Questions
893 Questions