1996 Oldsmobile Bravada "remove ignition switch" Questions

remove the lock tumbler portion of the ignition switch and take it to a locksmith to have it rebuilt. A locksmith will take out the old washers and springs and replace them with exact new replacements

...ignition lock will not operate properly. Remove the shift lever boot and lift the console and you will probably find a broken wire that goes to a push pin type terminal. I purchased several different ...

...ignition switch for my 2002 Oldsmobile Bravada and It needs replaced.Please tell me the best way to remove the steering column to replace it. The Auto parts store said it would be simple. I have ...

...move out of park. Key is stuck but will still turn into start position. i had the same problem, when i took it to the mechanic he told me is the ignition switch..you have to replace the ignition ...

...remove ignition key lock cylinder. when my key will not turn ingnition? remove the plastic bowl around steering column to gain access around switch and u should see like tab u can press on the switch ...

...ignition switch has a anti-theft type lockout in the electronic switch inside steering column - have also had mine do this due to bad connection at the battery - remove both battery bolts and clean ...

remove my keys from the ignition and turn the headlight switch to the off position my head lights still stay on i have to remove the fuses to turn them off....could there be a short on the ground side

...Remove the plug and insert a small shaft driver into the hole and push up gently, the key will release. I had the same problem with my 97 bravada with the key not coming out of the ignition. Just ...

Ignition Switch failure 1996 Oldsmobile Bravada. All power lost when turn ignition on. Hard time getting key removed. I have the same problem but i noticed a noise by the shifter so i looked and ...

Remove the key from the ignition. Using the scan tool, enter BCM Data List. Select Input 1. Does the KEY IN IGNITION test display NO? -- YES - Go to Step 5 NO - Go to Step 9 5 Turn the ignition switch