2005 Nissan Xterra "mil bulb working" Questions

...bulb # to buy when a lamp burns out or a fuse goes. The MIL Lamps,Service Engine, Etc have been on all vehicles since 1981,some 30 years. Only now, that they come on several times a year, are people ...

...MIL has to be on in KOEO state (key on engine off), if the bulb is burned out everything will still work and the OBDII test computer will show MIL status ON, and if you don't have a computer to tell ...

mil bulb not work .conector damage.mil commando on code # p0420.p0401.p0740 P0420 = catalyst system efficiency below threshold (bank 1). P0401 = Exhaust gas recirculation-insufficient flow detected ...

...MIL. The alternative fuels ECM supplies the ground path. oops, the plot thickens... ill guess at 1500 what engine?, (size and cyl count)? as always, check all fuses (test them ) RDO1, Radio, and IGN1 ...

...bulb is burnt out , seen that a few times . Have the vehicle checked for code's DTC P0650 Malfunction Indicator Lamp (MIL) Control Circuit Circuit Description There should always be a steady ...

...MIL light that works when you turn you key on, before starting? If not, the bulb is blown out, and you should replace it. If it does work, I'd suggest disconnecting the negative battery cable and ...

mil light. I was told it should come on when the truck is started and the go out. YES, it should. either someone took the bulb out, or its burned out, or the ecm is not grounding the bulb (ECM is BAD)

indicator faults P0650-Malfunction Indicator Light (MIL) control circuit Is the light working properly? Does it come on for bulb check when the key is first turned on?

...An indicator is inoperative - CHECK ENGINE/malfunction indicator lamp (MIL) Bulb. Circuitry. Instrument cluster printed circuit. Powertrain control module (PCM) (12A650). GO to Pinpoint Test N

...controls the ground circuit for the mil. Could be something wrong with ground wiring circuit-- instrument cluster, itself or the pcm, maybe problem with bulb? The mil needs voltage and ground to