2004 Nissan Maxima "windows roll down back" Questions

roll it down which it seems to be off track, when I roll it down the right side of the window goes down and the end of the left side is in the middle of the window....When I try to roll the window up.

...roll back up. After it gets stuck, I usually have to open and close the door for the window to work. There is no noise from the motor or the switch when closing/opening the window but it is really ...

...windows work..its very humid in new york.could that be affecting it. No, humidity should not effect your window. Sounds more like the motor has gone bad or the tract has came loose from the window. ...

...windows fall down and wont roll up The regulators need replaced in the back ones the front one could be a window motor or a bad switch. Unplug the window motors and hook them up directly to a battery ...

...down with the window open, I have start the engine and drive a few blocks before the switch allows me to close the windows. Is it the same problem ? And how to correct ? Probably a circuit breaker ...

...ROLL DOWN? It could be that the linkage is broken or dislodged.. You could try looking down into the window well and see if you can see the locking mechanism and try to wiggle / pull it open with a ...

...back down. Replaced motor, reset the CPU by disconnecting the battery window went down and once put back into up position window will not come back down. Now passenger window is doing the samething. ...

...to release the bond between the window and ice so it does roll down. I figure I may have moved something out of wack by doing so? the window track may be broken or you may have nocked it off ...

...windows will not roll down but im getting power to the switches i can hear them clicking except one in the back 1996 nissian maxium if they click you may have bad motors, or no ground to the ...

...roll up the front windows of my 2002 maxima, the windows go all the way up then go back down about 6". They do not stay fully closed the window regulator microswitches went bad, try to find them on a ...