...lights have a good ground connection to the body there is a ground wire for all of the lights . A bad ground or a bad bulb in the front even if the light appaers to work still has two filamants
...end (black) and the other to a good ground to the body of the car. If the light comes on it is a bad
work-91maxima Check the ground connections. I've had good bulbs that didnt work because there was a bad ground leading to the bulbs socket
...They come on when you step on the brakes. The brake lights are unaffected. WRONG BULB IN REAR OR BAD GROUND.CHECK ...
...except one in the back 1996 nissian maxium if they click you may have bad motors, or no ground to the harness.while holding the switch on ,test light connected, try grounding the other ...
...perfectly fine I don't know what's wrong with them can someone help Possible loose connection or bad ground draws too much current when running against hard force. Check wiring and
...effected by this issue too. sounds like a ground issue to me have all grounds checked could be jus bad ground. my front passenger door lock switch won't work, but it does work for the rest of
...any thing please help I have seen through experience and not just from hearing that it was a bad crankshaft position sensor even without a DTC of P0335. Also a bad ECM relay has caused this. ...
...wires. When the vehicle is put into gear, the ECM starts looking for the sensors, if the ground is bad, the ECM pulls ground current through the sensors. Then check the
...bad connection on the ground wire. I suggest you check the ground connection, the negative terminal follow it to where it is grounded on the chassis,motoror grounding block, make sure it is ...
1,301 questions posted
Usually answered in minutes!
1,309 Questions
1,122 Questions
1,007 Questions
857 Questions
480 Questions
