2003 GMC Yukon XL "ipc dic" Questions

...sure that connector is still plugged into the panel. Fuse block under the hood, fuses marked IPC/DIC, SEO, IGN E and SEO IGN all power the instrument cluster. Instrument clusters are a common

...ipc/dic fuse which is not blown. how to fix? there is a good possability that either the button contacts are bad,the very thin wires are broken or the contact area of the horn ring that the circuit ...

...ipc/dic fuse and where is it located? The IPC displays the season odometer information from the BCM in the driver information center (DIC). The odometer will display an error if the IPC detects ...

IPC/DIC DIC blank, Gauges inoperative. All these conditions happened suddenly and at same time. Truck still runs fine, just no info. make sure you have power and ground at the ipc connector, if you do

...the TBC fuse controls. Diagram shows 4 fused power feeds to the IPC; IPC/DIC and SEOB1 hot at all times... IGN E, SEO IGN hot when start and run. I find no relays on the IPC but it's free advice :

...dic and install it in my 2005 custom lasabre. No. This is a part of the IPC and the vehicle configuration in the BCM would have to be changed, which, due to your VIN, will not allow for programming. ...

...IPC illuminates the ENGINE OVERHEATED/STOP ENGINE - 42 indicator in the DIC and sends a class 2 message in order to activate an audible warning when the powertrain control module (PCM) detects that ...

Location of fuse for D.I.C on my 03 Chevrolet silverado 1500 Driver info. center . IPC/ DIC fuse 10 amp - under hood fuse box .

...DIC Didplay just quit working?? Looked for a specific fuse and didn't see one. Whats next?? {: ) If you are referring to the IPC message screens going blank, and the gages and warning indicators seem ...

...to see any DIC message, warnings, mileage, etc. What can be done to fix this? have you tried to get any codes? could be a controller issue or a button issue sticking? have the codes for the ipc ...