2003 GMC Sierra "wiper motor pulse board" Questions

...wiper motor control module needs replacing. On some models you can replace the "pulse board". On some you must replace the wiper control module which mounts directly to the windshield wiper motor. ...

...to much money... The pulse board is located on the wiper motor. It usually has 3-4 screws on it and the female connector for the plug. Remove the screws and it lifts right up. Then remove the

wiper motor. It has bad solder joints were the wiring connector is soldered to the pused module board. You can either replace the module or just touch up the solder joints yourself. Cheers, Sven There

...Windshield Wiper Motor Pulse Board on 2005 chevy impala Windshield Wiper Motor Pulse Board Change the wiper motor, and you replace the pulse board.. You can not buy the board separate from the

...wiper motor or the pulse board( an electronic circuit board in the wiper motor) in the motor the new wiper motors are about 80.00 at advance and the pulse boards are about 30.00 if the wipers come on ...

...wiper motor. open hood and look on drivers side firewall you will see wiper motor you might just have a problem with the pulse board and not the motor disconnect wire plug at motor remove screws on ...

Placement of wiper motor pulse board on 2001 Monte Carlo. We are trying to put a new pulse board on the motor need to know placement of the wiper motor. Thanks! it will be behind the motor

...when on delay they pause in the down position. replaced pulse board. found a small clip in the nook where the motor/wiper trans mounts Usually the park switch inside the wiper motor is the

Wiper Motor It runs some times. If I open the hood and hit the motor it will start back up again.Does it sound as if it needs to be replaced? And if yes How do I remove the old one? Thank you Scott ...

...with the motor? more than likely the pulse board loose at the wire connector. try wiggling the connector with wipers on (keeping hands away from wipers) then try tapping the motor with a small