2001 GMC Yukon XL "truck parking brake adjustment" Questions

Ad

Emergency brake used to work great now it hardly does anything (might pass inspection) , this happened before i parked it for the winter and now the rear breaks are always holding. At first i thought ...

Ad

...parking brake light come on while driving but they will go out if the car is restarted. Could it be a sensor or ECBM? try to pull up on your parking brake pedal with your hand when light comes on. if ...

Ad

...truck. You must depress the vehicle brake pedal to move the shift lever from park to any other position. Sometimes the switch (the brake pedal switch) which provides this signal goes bad, sometimes ...

...parking brake alarm and light still on even though brake is off. How do I fix this? Well, at the brake arm, there is usually a switch around there, somewhere...disconnecting wires would tell if it is ...

...brake assembly, if you look at the assembly, the switch is either out of adjustment, out of place, disconnected, or has failed. Should be an easy fix. Fuse would not just turn off chimes, other items ...

Question about GMC Yukon XL

9 Answers

...on left. GM dealer fixed this for free because of the bulletin. I have seen the CV boots on these trucks make noises like this. If you spray lithium grease on the boot it will go away. check if its ...

Question about GMC Yukon XL

1 Answer

...truck. Park Brake Adjustment (Disc Brake) Tools Required j 21177-A Drum-to-Brake Shoe Clearance Gage Park Brake Shoe Adjustment Caution: Refer to Brake Dust Caution. Important: The park brake shoes ...

...parking brake. do you need to take anything apart? You cannot adjust the cables on a minivan manually. the tension is automaitcally adjusted by the self adjuster on the pedal release. The park brake ...

Parking Brake doesn't work. I have adjusted the Parking Brake doesn't work. I have adjusted the cable, and the cables to each rear wheel are moving freely. Check your rear brakes and their adjustment.

...PARKING BRAKE NOTE: Tensioner adjustment is only necessary when the tensioner, or a cable has been replaced or disconnected for service. When adjustment is necessary, perform adjustment only as ...

Not finding what you are looking for?
2001 GMC Yukon XL Logo

679 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...