change oil display How do I reset the system after an oil change. It still says I have to change the oil?? on yukon bring up display and either push to reset button or press and hold down the trip ...
...xl how to reset change oil light turn the key to the run position engine off, push the gas pedal all the way to the floor then release it 3 times within 5 seconds, the DIC will say oil life
...do you reset oilchange light on a 2001 yukon xl turn key to on position, pump gas pedal to floor 5 times and turn off key. start vehilce. Change oil light should flash for 7 seconds and then go
reset the change oil on message center Turn the key to the run position with the engine off. Push the gas pedal to the floor 3 times within 5 seconds. Light should start flashing. Then it should reset
...reset service lamp after oil change on a 2000 yukon gmc I have a 2005 GMC Envoy and you turn the key to on, then press the gas pedal to the floor three time in 5 sec. The oil light blinks once and ...
...to reset the change oil light on 2002 yukon Denali this is in the operators guide, lost that? turn key on do not crank enguine press gas peddal all the way to the floor three times with in 5 ...
...reset by a technician or your battery cable is removed and replaced after a minute.....please get back to me if you need any more help... I HOPE I COULD HELP!!! hi i have a 2003 yukon denali my check ...
...reset switch or a trick like the oil change light? The fuel pump should have brought fuel up to the engine almost straight away.I have a feeling that you should get the fuel pressure checked at the ...
...Change Reset A press of the OIL CHANGE RESET switch will allow you to reset the oil life feature to 100% (or your Personalized Oil Reset Percentage). After you have the oil changed, you must execute ...
...reminder is reset to 100% You can find the reset procedure here ...
679 questions posted
Usually answered in minutes!
721 Questions
500 Questions
169 Questions
128 Questions
17 Questions