2001 GMC Yukon XL "ac belt" Questions

...ac belt tensioner and now i cannot get the belt to go back on, it seems to need to be half an inch longer, yes the new belt and tensioner are same size as old ones. also i have liquid slugging in my ...

ac is on and we accelorate there is a loud hissing noise. I think the belt needs tightend. but cant see what is adjustable. usually the altinator can be adjusted but it doesnt look like it can on this

AC Belt got shreaded. Just changed the pulley and belt and the belt broke again. How do you put a new belt on You probably did it right Check your compressor not seized No way a new belt should just ...

ac compressor belt located? The A/C compressor belt is integrated with the serpentine belt also. The serpentine belt runs the A/C compressor, water pump, power steering pump, and alternator. Hope this

belt. and the noise still same,also noticed when AC on it cause load on the engine which i can feel. CAN YOU HELP AND ADVISE. RGDS it sounds like your ac pump clutch bearing are sezing up they will be

...AC belt both times also.. mechanic checked the compressor and says it looks fine. I have learned when you go thru town just cut off the air until you're not where people will look at you funny.LOL. ...

AC belt. I had the belt replaced and the system recharged. It now makes a noise when you accelerate after start up. But that is the only time. AC blows cold air. Mechanic said i need a new compressor.

...ac belt replaced there is a flapping noice when I first drive the beast. The shop then replaced my drivet and the flapping is constant along with a sqeal now Help take it back to the garage and ask ...

...belt issue? 2) my car vibrates slightly also , but only for a several seconds and then goes away. this seems to go away when i turn the AC down or off most of the time. - my car seems to be running ...

...ac compressor clutch Not too difficult if you have enough access for on vehicle. If not you will have to remove to a bench. Go online with the make/ model of the pump and click on "illustrations" at ...