...and go to work? with the door open see if latch is stuck in close position . If so hold handle open and pry with screwdriver to open latch ..If that works latch needs to be lubed for smooth ...
...closed position. does it bounce back open? Its like a hook latch, pull the door handle to open it and at same time pull the latch out. And it should move out and leave it open for the pin to go into ...
... Hold the outside handle up and then press on the latch that is stuck in locked position..it should ...
...open. I have seen the posts where people jack up the door if it is too low, but mine is too high. I have tried hanging on the door, but that is not working. Any ideas would be great!!!! The nader pin ...
...to take a coathanger and manually open the door if you can get to the control arm. They are usually hard to get to and pretty expensive. It is located under the dash at the heater core box. Good
...door closed, they were back to 100%. Tonight there was smoke coming up from the passenger speaker grill on the dashboard. I took the glovebox out and the wire leading from the ''button'' on the side ...
...pocket where you pull the door closed there is a rectangle cover that needs to be pried off so you can access the 2 screws. There is also one in the door handle where you open the door. hope this ...
...the door to close and open, but the outside handle is very loose and it appears to work. How do I fix the door so that I can close the door and go to work? You will have to take the panel off
...position then release the handle and see if it will shut. Hope that helps You will have to lift the dooe handle like you are going to open the door with one hand and with the other flip the latch
closed and I can't get it to open. Do you mean the latch mechanism? Try spraying it with some lithium grease and then pull on the handle and physically open the latch up. If the handle doesn't release
1,950 questions posted
Usually answered in minutes!
1,123 Questions
1,127 Questions
1,104 Questions
838 Questions
768 Questions