2000 GMC Jimmy "install tumblers new car key" Questions

Ad

Question about GMC Jimmy

2 Answers

...new key to the BCM. when you get a little further into getting it out...I can walk you through getting it in there are times when one must turn to the experience of a dealer's service department. ...

Ad

...Before installing the new tumbler take it and your door key to your local locksmith and they can key the new tumbler to work with the old key. This saves you from have to have two different

Ad

...tumblers. IF this is an ignition lock that has a chip sensor, the practical repair is a complete key/tumbler replacement. This isn't a DIY repair. It will involve removing the steering wheel and ...

...new key. if your car is newer all this will need to be coded to the computer. Sorry :( You might try having a dealer cut a new key for you, With the VIN, he can cut a new key that will fit the ...

...install the new on that came with the new tumbler. I don't use the new tumber as I don't have a key with the diode in it thats right for the car. with the old key in the old tumbler with the new wire ...

...tumblers are still coded to the key the same key will still work, Now if the tumbler is installed with a new key then the relearn process may need be performed which takes about 30 minutes additional ...

...new tumbler and work it in till it feels that it will slide in (at this time there will be no use for the nail).once it is in turn on the car on check its movement and if all is fien the job is ...

Question about GMC Jimmy

2 Answers

...new tumbler will be easy.please rate this solution hii i have the Honor to help you, Sir This is an easy one. on an older car you put the key on accessory, push a needle in the little hole in the ...

...things into the trunk. Stopped when I opened the door with a key. might be ignition tumbler , my friend had same problem , the key sensor broke , there is reset process after new tumbler is ...

...install tumblers in my new ignition switch in my 2001 saturn ls2 unless ur a locksmith changing the tumblers is extremely hard .if you want to change the ignition cylinder you need to to check your ...

Not finding what you are looking for?
2000 GMC Jimmy Logo

1,950 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

1998 GMC Jimmy
1998 GMC Jimmy

1,127 Questions

1999 GMC Jimmy
1999 GMC Jimmy

1,104 Questions

2001 GMC Jimmy
2001 GMC Jimmy

838 Questions

1996 GMC Jimmy
1996 GMC Jimmy

768 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...