Question about GMC Jimmy
...cant get horn cover off Check this procedure 1995-99 Vehicles (see Figure 1) Fig. 1: Exploded view of the ignition and key alarm switch (click image for zoom) Remove the column shroud halves. Remove ...
...cant remove the key. To remove the Key: there is a small hole on the steering column below the area of where the ignition key cylinder is. If you have this, you can remove the small cover and take a ...
cant get the thing to turn. is theres button somewere that lets yoou do this REMOVAL On models equipped with airbag, disarm airbag as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING. On
Question about GMC Jimmy
cant get keylock cylinder to seat.and.lock. Looks like plastic "pin" in key cylinder and plastic pin in housing. Ignition switch actuator pin? Check to see that the cylinders are exactly the same. Try
Question about GMC Jimmy
...cant afford a locksmith or dealer. Any way around this? before you drill it tap the end of the lock cylinder where the key goes in with the handle end of a large screwdriver. try different levels of ...
...my daughter grand am stole factory stereo and now her key wont turn switch, need help removing dash mount lock cylinder. i bought a new one, but cant get the old one out you need to remove old
...Remove the key from the switch. Attach the electrical connectors to the ignition switch. Install the instrument cluster using the procedures found in this section. Install the heater & A/C control ...
Question about Cars & Trucks
...remove a locked key lock cylinder if i cant turn to the on position The ignition needs to be in the ON position to be removed, if you can not turn it at all you will need to drill it out in order to ...
...cant remove the lock cylinder by normal means...then youll also need the cylinder...and it will have to be recoded to the vehicle so the anti theft will allow the new keys/cylinder to start the car. ...
...cant gvet the covers off around the lock cylinder I hope this helps....these are the steps to removing and replacing the cylinder: Remove the knee bolster. Remove the steering column trim covers from ...
1,949 questions posted
Usually answered in minutes!
1,123 Questions
1,127 Questions
1,104 Questions
838 Questions
768 Questions