2000 GMC Jimmy "brake pedal 97 truck" Questions

...hood in panel box.First try this, push and hold brake pedal while pushing on and wiggle the hazard switch if brake lights come on then replace the turn signal switch and you will have brake

...hold brake pedal while pushing on and wiggling the hazard switch and if the brake lights come on then replace the turn signal switch. Ok? where is the turn signal switch? is it on the steering

...brake pedal on 1994 utility models. On all other models, remove the retainer and brake switch from the brake pedal.   Disconnect the pushrod from the brake pedal.   From under the dash, ...

...lights work when pedal is barely touched then go off when pedal is pressed harder Check your Brake Switch on the Back of your Brake Pedal, you have loose wires or your switch is not working ...

97 dodge Dakota brake light and ABS light and brake light on when brake pedal depressed pump pedal lights go out. Pedal comes up lights off Sounds like it is low on brake fluid.

...someone step on the brake pedal,touch the test lite probe to one of the contacts inside bulb socket,if it dont work your brake lite switch is out,its located under the dash,maybe on brake pedal ...

...brake pedal several times; I can feel the brake pedal "sink" finally and I'm able to put the car in gear. Very random situation. have your ABS system scaned for codes(intermtent code) as for the car ...

...brake pedal with no leaks and I just added new mastercylinder and new rear shoes. bleed lines and still pedal pumps up then when I rests truck lost brake pedal with no leaks. installed new master and ...

brake pedal and see if there could be a rubber bumper missing or you could have a bad switch. Switch should be on or close to brake pedal and when you press pedal listen for switch to click. check the

...have brake lights Check the brake light switch on the pedal assembly. Check to make sure the wires are still connected and not broken. Make sure the contacts are closing when the pedal is