...4x4 and is there any sensor on ****** that would be involved or cables? The vehicle speed sensor(VSS)is located on left rear of transfer case on 4x4( 4wd) 1993 jimmy.Ensure ignition is off.Raise and ...
where is the evap purge solenoid sensor on a 1997 jimmy where is the evap purge solenoid sensor where is the evap sensor on a 1997 gmc jimmy 4x4 6 cylinder
...sensor is located as im told that is the most likely culprit. its a 4.3 vortec 4x4 slt model if that helps. Hello jerryparker6, The image below shows the location of the crank position sensor. I hope ...
...4x4 Jimmy comes on intermittently when I am driving. Also sometimes when I am braking it seems to engage the ABS system even when on dry/clear roads and surfaces. Not having any other braking issues ...
...sensor 2000 gmc jimmy i need the location of my 1 2 and 2 3 shift sensors 2000 gmc jimmy 4x4 Inside trans. pan at the rear of the valve body. They have a wire clip which holds them in. Your ...
4X4 4.3L V6 . Runs great for about 15 minuets?. Then it chokes when you push on accelerator. I replaced the ignition module but still have same problem? I am at a total loss of what to look at next? I
PO133 4.3l WITH 4X4 try to reset,could be leak,replace sensor. Here's a link to your code.
Are the Anti-lock brake system and the 4X4 shifting system inter-connected? Do they share sensors? antilockbrakesmalf.ondryroadsworkslikeitoniceyroads
4x4 1996 replace map sensor 2 times code still gos off and loses power i relace air filter clean carb if i clean sensor it will work for 2 to 3 days CHECK MAP SENSOR HOSE FOR VACUUM IT NEEDS VACUUM TO
i replace a map sensor 2 times on a 1996 jimmey 4x4 it still comes up a code if i clean it it will last for 2to 3 day i clean carb a new air filter check wires check wire connector for damage or short
1,950 questions posted
Usually answered in minutes!
1,123 Questions
1,127 Questions
1,104 Questions
838 Questions
768 Questions