2006 Ford Focus "tensioner diagram" Questions

Ad

Question about Ford Focus

1 Answer

...diagram it will show a tensioner pulley and idler pulley and the approximate location. Most Fords use a 15mm or 16mm bolt on the tensioner, this is where you put a wrench to rotate the tensioner and ...

Ad

...diagram. · Rotate the tensioner again to allow the new belt to slip over the tensioner pulley. Release the tensioner again. Replace the drive belt lower cover and lower the vehicle. Please do ...

Ad

diagram for 2000 ford focus where is the tensioner pulley? Belt diagrams can be found at most NAPA auto parts stores.  The tensioner is located on the front of the engine, usually above the other

Question about Ford Focus

1 Answer

...diagram showing you the way the belt should go back on also if you look at your belt just underneath the belt there is a belt tensioner normally using a 3/8 socket and pulling down or up on the ...

diagram under the hood that says "drive belt routing" You need to release tension on the tensioner pully with a serpentine belt tool or a long 3/8" breaker bar. rout the belt according to the diagram,

...belt diagram available from parts stores. you have a tensioner, so you need to turn it to release tension. other than that i need more info. Need a belt routing diagram for a 2006 ford focus 2.0l Vin ...

Question about Ford Focus

1 Answer

...Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right etc. c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner ...

...belt routing for your car,the only other choose is doing have a/c (airconditioning). hope this is helpful.also i ponited to the tensioner on each diagram to show you how to release the belt

Question about Ford Focus

2 Answers

...diagram that matches your pulleys and identify the part that failed. Take the part off and take it to the parts store and get a new one. Put it on and then route the blet according to the picture. It ...

...diagram under the hood with the illustartion of the belt. and you can just look and see if you can see where there is a belt Tensioner, Loosen the Tensioner and put the belt on again and tight that ...

Not finding what you are looking for?
2006 Ford Focus Logo

1,274 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,749 Questions

2001 Ford Focus
2001 Ford Focus

2,612 Questions

2003 Ford Focus
2003 Ford Focus

2,055 Questions

2005 Ford Focus
2005 Ford Focus

1,226 Questions

2004 Ford Focus
2004 Ford Focus

897 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...