2006 Ford Focus "problems key ignition turn" Questions

...key in the ignition helped but in most of the cases the ignition cylinder has to be replaced.And the new key has to be re-programmed.The cost of all this stuff is near to $300.Some users claimed this ...

...key in ignition.Try this wd-40 spray couple of times,if still the same problem then,the ignition has to be replaced.Also the keys are to be reprogrammed by the dealer.Without getting your car key ...

ignition key will not turn Try turning the wheel when you are trying the key. Sometimes the steering wheel lock gets into a bind and you have to release the pressure from the steering wheel to get the

ignition problems The key won't turn If the key won't turn in the ignition barrel,  it could be as simple as the key is worn.  If you have a spare key try that first.

...ignition key in the ignition and I tapped it one time dead centre ( tap it with greater force if the first time it doesn't work). I wiggled the key as if to turn it on and off and finally released ...

...key from the ignition, I would use WD40 and lubricate the ignition lock until it is almost overly lubricated and take the key and push it in the lock and tap the end of the key into the lock with a ...

ignition Key stuck in ignition of 2005 Ford Focus. Tried jiggling steering wheel while turning key, tried moving from Park position. Car starts, but I have to use the extra key to lock car. Also, does

...key in the ignition and it will not turn to start. I tried to place it in nuetral and it did not work either. the steering wheel is locked.. It is for a 200 Ford Focus The ignition doesn't use ...

...problems did the same thing when i broke my key throwing it at a wall i figered out it was a chip missing in it so maybe its YOUR KEY CHIP. found chip and it started. a debri inside the key mechanism ...

...Can bypass transmission interlock and shift out of park. Brake light fuse good but no brake lights! ZX3, AT, 66K miles. No problem until now... Replace either key cyclinder or ignition