...light not working? I have a problem with the reversing light on my 06 focus st2. When I remove the bulb from the holder i get 11.3v at it, but the bulb will not come on. I removed the holder from the ...
...light fuse. The tail lights and liscense plate lights run on one common circuit, the brake and reverse lights run on another. Good chance this fuse has blown, Consult your owners manual as for the ...
...reverse light switch, using another battery, connect earth to chassis and the live to one of the reverse light switch, one of the wires will put the ignition on. Now instead of the coat hanger, use a ...
...light bulb accessed fro under wheel arch you will need to unscrew the engine under cover at front then drop it down enough to access the rear of lamp it will have a cover/wire plug/socket that you ...
My 2003 Ford focus is making a rattling sound by the driver side in the engine when I go over a bump or pot hole what could this be? There are a number of things which can do that. If someone did not ...
...working on or near any fuel related components. Highly flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury. To install, reverse the ...
...Reverse procedure ti install, then fill the brake master cylinder with clean fluid, loosen the bleeder screw at the top of the trans, and bleed the clutch as you would the regular brake system, but ...
...light bulb p, li { white-space: pre-wrap; } Ensure that the headlights on your Ford Focus are off by checking you have turned the headlight control all the way to the off position. Make sure your car ...
...working on or near any fuel-related components. Highly flammable vapors are always present and can ignite. Failure to follow these instructions can result in personal injury. WARNING: This procedure ...
1,274 questions posted
Usually answered in minutes!
3,749 Questions
2,612 Questions
2,055 Questions
1,226 Questions
897 Questions
