1993 Ford Ranger SuperCab "splicing fuel pump wires" Questions

...fuel pump will run with ahot wire hooked to it but to turn the key on it will not run ive checked the relay it is good You have a break in the power wire running back to the fuel pump. You can trace ...

...fuel pump how to wire the fuel pump? Are you wanting to wire voltage or ground circuits? Remember, you have to deal with the fuel gage sending unit circuit or the fuel gage won't work. The basics, if ...

...fuel pump doesnt work Try running a separate power wire from the battery direct to the pump. If this cures the problem then splice it into a wire that has power when the key is on and put an in-line ...

...fuel pump wasnt working so i took it out to replace it, and the ground wire was broke it was just hanging there so i spliced it and made a new one and reconnected it. Then put a new fuel pump on and ...

...for the fuel pump to work. Your switch should be behind the passenger side lower kick panel. to the right. Should be located on the passenger side to the right of the transmission hump under the ...

...fuel pump and check for power. on the pink with black strip wire i have power for about 3 sec. but when i plug it back in the pump doesnt turn on ''new'' pump also. can you help me? How is the Ground ...

...fuel pump seems to lose power and shuts off and then it will sit for like 30min and come back on most common prolem with this is the fuel pump gets warm and is worn out when it gets warm enought the ...

fuel pump, the wiring harness is different than the old one how do i change it out? there was a instructional website prived with the new part but it talked about splicing the wires can you do that if

Fuel Pump will not come on I have changed the fuse for the fuel pump still does not work: I bought a new fuel pump still does not work. I took the fuel pump out and jumped it from the battery (worked)

fuel pump to the wire that runs on top of my gas tank on my 2003 mercury grand marquis 4.6 l v8 If the new pump doesn't have a matching connector, it's the wrong pump. Return it and get the right one.